SchedulerTimelineView horizontal position

[Roberto Becchetti]

Goodmorning,

I'm using a sfscheduler with resources. If I use resource I can't set TimeIntervalWidth=-1 for auto adjust  TimelineView columns so I set TimeIntervalWidth="30" and my timeline appears like this image.

Is there the possibility to set Horizontal alignment for align timeline on the right?

Thanks, regards
Roberto

[Vidyalakshmi Mani]

Hi Roberto,

Thank you for reaching out. When the TimeIntervalWidth is set to 30, the time slots will be displayed with a width of 30, as shown in the image you shared, which is the expected behavior.

We are currently investigating the issue with setting the TimeIntervalWidth to -1 for auto-adjustment and will update you with further details shortly.

If you have any other questions or need additional assistance, please feel free to contact us.

Regards,

Vidyalakshmi M.

[Vidyalakshmi Mani]

Hi Roberto,

Regarding issue “If I use resource I can't set TimeIntervalWidth=-1 for auto adjust  TimelineView columns”

We have checked, and we can replicate the reported issue from our end. We have logged an issue report for the same; we will fix this issue and include the issue fix in our weekly NuGet release update which is expected to be available by January 7, 2025. We appreciate your patience until then.

You can track the status of this report through the following feedback link: Crash-occurs-when-timeintervalwidth-is-set-to-1-with-resources-in-sfscheduler

Note: The provided feedback link is private, and you need to log in to view this feedback.

Disclaimer: Inclusion of this solution in the weekly release may change due to other factors including but not limited to QA checks and works reprioritization

Regards,

Vidyalakshmi M.

[Roberto Becchetti]

Thanks.

Roberto

[Vidyalakshmi Mani]

Hi Roberto,

Regarding issue “If I use resource, I can't set TimeIntervalWidth=-1 for auto adjust TimelineView columns”

We have fixed the reported issue and included the issue fix in our latest weekly NuGet release update version 28.1.38, which is available for download at nuget.org

Root cause: The issue occurs because setting TimeIntervalWidth to -1 with resources causes improper layout measurement and width calculation.

We thank you for your support and appreciate your patience in waiting for this release. Please get in touch with us if you require any further assistance.

Regards,

Vidyalakshmi M.